KNIGHT 3000 SCANNER V1.0
BASIC SETUP:
Here you can build your own Knight 3000 Scanner. It´ll be round about $200. You only need those parts:
- WS2812B LED STRIPE 5V (TOTAL 360 LED´S) link
- ARDUINO WEMOS D1 MINI link
- DC/DC Step-down modul 12V to 5V minimum 8A
- 1 box and some wires.
- 1 “U-Profile” from your local Hardware store. (to put 3 Stripes per side into it)
Building time for the electronic box is 6 to 10 hours. (Depending on your Skills) Building time for the 2 lightbars is about 4 hours.
The Software: link
In this version you can connect with wifi “K3000_V2020-08_004” and password “Comtron1234” to the Scanner and change the Modes. Just open the the website 192.168.4.1 in any Browser.
You need the arduino Software to upload the Programm to the controller. link Connect USB to the arduino ONLY when the 12V Power supply is connected or no LED-Bars are connected!